3102/3203/33303/ 3A12 /3A21 H22/H24 Aluminum Alloy Sheet Aluminum Sheet

3003/3004/3005/3006/3007 H12/H14/H22/H24 Aluminum Alloy Plate Aluminum Sheet 3003 aluminum alloy is al Mn alloy, which is the most widely used antirust aluminum. The strength of this alloy is not high (slightly higher than that of industrial pure aluminum), and it can not be strengthened by heat treatment. Therefore, cold w

Featured Products


3003/3004/3005/3006/3007 H12/H14/H22/H24 Aluminum Alloy Plate Aluminum Sheet 

3102/3203/33303/3A12/3A21 H22/H24 Aluminum Alloy Sheet Aluminum Sheet

3003 aluminum alloy is al Mn alloy, which is the most widely used antirust aluminum. The strength of this alloy is not high (slightly higher than that of industrial pure aluminum), and it can not be strengthened by heat treatment. Therefore, cold working method is adopted to improve its mechanical properties: it has high plasticity in annealing state, good plasticity in semi cold working hardening, low plasticity in cold working hardening, good corrosion resistance, good weldability and machinability Can not be good. It is mainly used for low load parts requiring high plasticity and good weldability, working in liquid or gas medium, such as oil tank, gasoline or lubricating oil conduit, various liquid containers and other small load parts made by deep drawing, and wire rod is used for rivets.

3102/3203/33303/3A12/3A21 H22/H24 Aluminum Alloy Sheet Aluminum Sheet

Chemical Composition
Mn: 1.0-1.5
Cu: 0.05-0.2
Fe: 0.7
Silicon Si: 0.60
Zn: 0.10
Aluminum al: margin
Density: 2720kg / m3

3102/3203/33303/3A12/3A21 H22/H24 Aluminum Alloy Sheet Aluminum Sheet

Mechanical Properties
Tensile strength σ B (MPA)) 140-180
Conditional yield strength σ 0.2 (MPA)) ≥ 115
Sample size: all wall thickness
Note: longitudinal mechanical properties of pipe at room temperature
 
Alloy TypeTensile Strength
(250ºC/MPa)
0.2% Yield Strength
(MPa)
Hardness
(HB)
Elongation rate
(%)
5052-H1121751956012
5083-H1121802116514
6061-T6512902409512
6082-T6513152809412
7050-T65151045513510
7075-T65157250315011
2024-T35147032512020
3003-H24140-180115454

3102/3203/33303/3A12/3A21 H22/H24 Aluminum Alloy Sheet Aluminum Sheet

3102/3203/33303/3A12/3A21 H22/H24 Aluminum Alloy Sheet Aluminum Sheet

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours