Aluminum Magnesium Manganese Alloy Roofing Sheet Raw Material Aluminum Coil

    Product introduction Specification:01) Alloy: A1100 A3003 A3004 A8011 etc.02) Aluminum thickness: 0.02-3.0mm03) Max aluminum width: 1600mm      Standard width: 1240mm04) Outside diameter: 1200mm      Interior diameter: 150mm, 405mm, 505mm, etc.05) 0.5-3.0T/coil or by buyer\'s opti

Featured Products

    Product introduction
 Specification:

01) Alloy: A1100 A3003 A3004 A8011 etc.
02) Aluminum thickness: 0.02-3.0mm
03) Max aluminum width: 1600mm
      Standard width: 1240mm
04) Outside diameter: 1200mm
      Interior diameter: 150mm, 405mm, 505mm, etc.
05) 0.5-3.0T/coil or by buyer's option
06) Coating: PVDF, PE and ACRYLIC
08) Total coating thickness:
                                              PVDF: more than 25um
                                              PE: more than 18um
09) Coating hardness: (pencil hardness) more than 2H
10) Coating adhesive: no lower than first grade
11) Impact resistance: no cracking and peeling(50kg/cm, ASTMD-2794:1993)
12) Flexibility(T-bend) : 2T or by your option
13) MEK resistance: more than 100
14) Bottom side of aluminum sheet is coated with protective polyester material: thickness more than 6 micron
15) Outer packing: export standard, wooden plate
Aluminum Magnesium Manganese Alloy Roofing Sheet Raw Material Aluminum Coil
 

Aluminum and magnesium, manganese plate characteristics compared with the characteristics of the color steel plate

 Aluminium magnesium, manganese
 
Choi steel
 
The durability of
 
And atmospheric alumina film formation, prevent further corrosion.
 
Under the humid air, rain and snow water erosion corrosion rust easily, especially the part of the joint.
 
The weight of the
 
Light weight (density of 2700 kg/m3)
 
As the heavy weight (density of 7850 kg/m3)
 
The strength and stiffness
 
The content of aluminum alloy with magnesium, manganese, therefore has a certain strength and stiffness
 
The strength and stiffness is better
 
appearance
 
Can be divided into the paint (hammer, embossing, pre passivation alumina surface treatment, etc.) and paint (PVDF, SMP, PE, PVC film, etc.)
 
Painting class (PVDF, SMP, PE, PVC film, etc.)
 
Lightning protection performance
 
Thickness is 0.7 mm and 0.7 mm, can be directly as the lightning protection ShanQi (national standard < < building lightning protection design specification > > GB50057), avoid in roofing perforation.
 
Usually use 0.5 mm thick aluminium zinc and galvanized steel plate, cannot meet the ShanQi directly as lightning protection, additional building lightning protection by ShanQi (such as a lightning rod)
 
Fire safety
 
Low melting point (660 degrees c), there is a fire, the roof was burning through easily, make the fire spread outward, not inward lateral spreading, into fire hose from the top to help firefighters put out the fire.
 
Steel of high melting point (1515 degrees c),
 
Cost performance
 
higher
 
The lower
 
 

         

Applicable fields:   
1    gym, library, swimming pool, such as wind and rain playground roofing
2     art center, exhibition center, theaters, etc
3     schools, hospitals, activity center, scientific research center of roof and metope.
4    large factories (mainly for the state-owned enterprises or companies from chemical, manufacturing, tobacco, electronic type)
5     transportation hub, like bus station, high MTR station, subway station, airport and other roofing
6     upscale automobile 4 s shop
7     tourist attractions of roof and meto

Aluminum Magnesium Manganese Alloy Roofing Sheet Raw Material Aluminum Coil

FAQ
Q1: What is your terms of payment?
A:  30% T/T as the upfront deposit, 70% before delivery. 
Q2: what is the terms of delivery?
A:  FOB
Q3: What is the terms of packing?
A: Generally speaking, we put the goods packed in wooden cases, we can also request the packing goods.
Q4: What is your delivery time?
  In general: after receiving the payment within 7 days of shipment
Special cases in 15 to 20 days

Q5: How could you guarantee your products?
A: Each piece of products is manufactured by certified workshops, inspected by SORUN piece by piece according to national QA/QC standard. We also could issue the warranty to customer to guarantee the quality.
Q6: How do we trust your company?
A: We have specialized in building materials business for many years. The company is located in the Beijing area. 
                  

    

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours